Lewis Moon Posted January 29, 2011 Report Share Posted January 29, 2011 Can anyone give me any tips on a place to buy inexpensive "Jump Cops" for building PVC tube jumps? Cheap sources for the other equipment would be sweet to. Quote Link to comment Share on other sites More sharing options...
brndlbc Posted January 29, 2011 Report Share Posted January 29, 2011 Define "cheap". We just made 30 pvc jumps and used jump cups strips that cost us about $12 a set (bulk order). I think they run about $15 a set when not bought in quantity. Nice thing is they are guaranteed so if one breaks, you can get a replacement. They also have all the jump heights on them for all venues. So far, they are the best that we have had. http://www.clipandgoagility.com/jump-cup-strips-dog-agility/index.htm Quote Link to comment Share on other sites More sharing options...
Lewis Moon Posted January 29, 2011 Author Report Share Posted January 29, 2011 Actually, I was looking for a couple sets of the 1" clip on single cups. I'm only going to make a single jump, or at most two. I just want to practice in the back yard. Cheap as in affordable for a state employee who's had his pay cut to where he's making less than he did 15 years ago. Quote Link to comment Share on other sites More sharing options...
airbear Posted January 29, 2011 Report Share Posted January 29, 2011 Here's a link to how to make jump cups. Quote Link to comment Share on other sites More sharing options...
Lewis Moon Posted January 29, 2011 Author Report Share Posted January 29, 2011 Here's a link to how to make jump cups. Easy peasy. With a table saw and a cut off sled those will be short work. Quote Link to comment Share on other sites More sharing options...
rufftie Posted January 29, 2011 Report Share Posted January 29, 2011 i got mine on ebay. they were very reasonably priced at the time. i don't see the seller on there right now, but you could keep an eye on it. Quote Link to comment Share on other sites More sharing options...
MyTDogs Posted January 29, 2011 Report Share Posted January 29, 2011 Easy peasy. With a table saw and a cut off sled those will be short work. Hey Lewis, just be sure to file down the sharp corners- I can just see the dogs slicing themselves on a tight wrap around the upright or even during a mad crash. Quote Link to comment Share on other sites More sharing options...
JohnLloydJones Posted January 29, 2011 Report Share Posted January 29, 2011 OK, I'm cheap. Here's what I did. I cut a T piece in half along the long section and then in half along the leg to make two cups. They do not clip, so you will need to glue them or, as I did screw them in place by drilling a guide hole and using a metal screw. Quote Link to comment Share on other sites More sharing options...
rushdoggie Posted January 29, 2011 Report Share Posted January 29, 2011 They are not too hard to make, but yes, file the edges so they don't stab you or your dog, and make sure they are shallow enough that the bar falls easily if ticked. You want it to fall down so his feet don't get caught up in it if it comes down. Quote Link to comment Share on other sites More sharing options...
SecretBC Posted January 30, 2011 Report Share Posted January 30, 2011 The Clip-n-Go jump strips are a no-brainer for anyone who thinks they'll need to work with multiple jump heights. But if you only are working one dog (or multiple dogs of similar size), then I'd probably just do the homemade jump cups. But really, I love having fully adjustable jumps, as I don't always jump my dogs at full height. Quote Link to comment Share on other sites More sharing options...
alligande Posted January 30, 2011 Report Share Posted January 30, 2011 Mine are similar to JohnLoydJones, but I did not think about just screwing the Ts to the uprights, I carefully cut the uprights into pieces, and created uprights with the built in Ts at fixed regulation heights. Fiddly but it worked and much less expensive than buying cups. For my next jumps I am going to use wood and was thinking about using the pvc caps, cut them in half and screw to the wooden jump standard. Quote Link to comment Share on other sites More sharing options...
Chi-Ann's Mom Posted February 3, 2011 Report Share Posted February 3, 2011 Clean run also sells them: http://www.cleanrun.com/index.cfm?fuseaction=product.display&product_id=1191&ParentCat=307&string=clip%20and%20go%20jump%20cups They are $14.95 per pair with a discount of $2 for additional pairs. I have purchased the singles on EBay pretty cheap. But next time I will purchase the strips as that would make adjustments easier. Quote Link to comment Share on other sites More sharing options...
Demon Puppy Posted April 6, 2011 Report Share Posted April 6, 2011 I get them here: http://www.weave-poles.com/make%20it%20yourself.htm Quote Link to comment Share on other sites More sharing options...
Flamincomet Posted January 27, 2014 Report Share Posted January 27, 2014 I've been putting a jump together today, and got stuck at the jump cups. I'm not handy and short on cash, so all the DIY ways were not good choices for me. I just went to the grocery store and bought two big chip clips, then secured them with rubber bands on the uprights. Cheap, but effective. I'll eventually buy jump cups, but these will do for now. Quote Link to comment Share on other sites More sharing options...
rushdoggie Posted January 27, 2014 Report Share Posted January 27, 2014 Over the years I have come to appreciate furniture grade PVC, it seems to last longer (no UV degradation and broken fittings), its more attractive and the fittings are easier to use. Patios to go sells jump kits to make 4 jumps for a reasonable price, including snap on jump cups. Mine are several years old, live outside year round and still look brand new. http://store.patiostogo.com/dog-jump-kit--34-inch--box-o.html Quote Link to comment Share on other sites More sharing options...
rufftie Posted January 27, 2014 Report Share Posted January 27, 2014 I have made my own jump cups using a pvc tee and a wire saw. each tee makes 2 cups. first put the tee in a vise, then cut the tee in half thru the middle opening, making 2 identical pieces. here you have created he cup. now cut the "back" off the piece not quite 50%, more like cutting off 40%. now you have made the clip to push on to the pvc stanchion. Quote Link to comment Share on other sites More sharing options...
alligande Posted January 27, 2014 Report Share Posted January 27, 2014 I made my own cups using a PVC tee as well but I remade all my jumps and bought single clip on cups which worked out much cheaper than the PVC tees and are easier to use, as I usually train on my own it's not a pain only having one option, I did put electrical tape marking the different jump heights so I can move them if I want to work on a lower height. I also used 3/4" PVC not as stout but much cheaper for multiple jumps and work for practise jumps. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.